Electric submersible drainage pump, available in cast iron and stainless-steel alloys. Designed for use in mining, power plants and other industries that handle abrasive solids and water.
Data sheet:
Classification
Submersible electric pump
Electric motor
Three-phase squirrel cage motor, 2 poles.
Speed: 2950 RPM
Insulation class: H
Start: Star Delta, Soft Starter
Mechanical seals
Double mechanical seal in the oil chamber.
Rotary seal material: Silicon carbide.
Stationary seal material: Silicon carbide.
Elastomers: Viton
Discharge connection
6” H – 8” N. (*)
Motor protection
Thermistors in the motor winding Protection: IP 68
Cable
2 cables 4G35 +2×1.5mm2, 20m (66 ft) (*)
This pump must be connected to an external
control panel with adequate protection.
Bearings
Lower: Angular Contact Bearings
Upper: Cylindrical roller bearing
Limitations
Maximum submersion: 25m (82 ft).
Maximum liquid temperature: 40 ° C (104 ° F)
Liquid pH range: 6-11
50HZ | N | H |
---|---|---|
Power, HP (KW) | 125 (93) | 125 (93) |
Voltage (V) | 380 – 500 | 380 – 500 |
Nominal Current (A) | 219-166
| 219-166
|
Weight, lb (kg) | 2380(1080) | 2380(1080) |
Max. height, inch (mm) | 63(1600) | 63(1600) |
Max. diameter, inch (mm) | 24.6(625) | 24.6(625) |
Discharge, inch (mm) | 8(200) | 6(150) |
Strainer opening Ø, inch (mm) | 0.5(12) | 0.5(12) |
Cover | Nodular Cast iron |
Cylinder | Carbon Steel. |
Strainer | Carbon Steel. |
Impeller | High Chrome Steel |
Diffusers | Nodular Cast iron. |
Shaft | Stainless Steel |
Screws/Nuts | Stainless Steel |