Electric submersible drainage pump, available in various aluminum and stainless-steel alloys. For use in mines, power plants and other industries that handle abrasive solids and water
Data sheet:
Classification
Submersible electric pump
Electric motor
Three-phase squirrel cage motor
Speed: 3550 RPM
Insulation class: H
Start: Direct
Max. number of starts per hour: 12
Mechanical seals/seals
Double mechanical seal in oil chamber and water
Rotary seal material: silicon carbide.
Stationary seal material: silicon carbide.
Elastomers: Viton.
Discharge connection
3” H – 4” N. (*)
Motor protection
Thermo-contacts in the winding
Protection: IP 68
Cable
4G10 + 2×1.5mm2, 20m (*)
This pump must be connected to an external electrical cabinet
with adequate protections.
Bearings
Deep groove ball bearing C3.
Limitations
Maximum submersion: 20 m
Maximum liquid temperature: 40 °C (104 °F)
Liquid pH range: 2 – 11.
60HZ | H | N |
---|---|---|
Power, HP (KW) | 7,5 / 10
| 7,5 / 10
|
Voltage (V) | 380 / 440 / 460 | 380 / 440 / 460 |
Nominal Current (A) | 14,5 / 12,5 / 12 | 14,5 / 12,5 / 12
|
Weight, lb (kg) | 100 | 100 |
Max. height, inch (mm) | 786 | 786 |
Max. diameter, inch (mm) | 305 | 305 |
Discharge, inch (mm) | 3″ | 4″ |
Strainer opening Ø, inch (mm) | 7 | 7 |
Cover | Stainless Steel |
Cylinder | Stainless Steel |
Strainer | Stainless Steel |
Impeller | Stainless Steel. |
Diffusers | Stainless steel + PU |
Shaft | Stainless steel AISI 431 |
Screws/Nuts | Stainless Steel |